BETONEX PLUS
Protective cleaner for use in civil engineering, ready-mixed concrete and in precast component works
Performance Features
- universally applicable
- high adhesion in the mixer
- good protective effect
- no labelling required according to the hazardous substances ordinance and GHS
Description
BETONEX PLUS is a protective cleaner based on hydrocarbons.
Field of application
BETONEX PLUS prevents the adhesion of mortar and concrete on construction machinery, mixer trucks, concrete pumps, mixers, silos, steel- and large-area shuttering as well as all kinds of metal parts.
Application
Clean machinery and equipment with water. Next BETONEX PLUS is applied to the parts to be treated using a brush or suitable, oil-resistant spraying equipment (with SS 800067 teejet nozzle). In this way a thin, protective film is formed on the parts, preventing caking of concrete incrustations and facilitating everyday work. As a preserving agent it should be applied before the first use of the equipment and following each subsequent use thereafter. Consumption: approximately 20-40 m²/l. BETONEX PLUS should not be diluted with water, oil or solvent - it is ready to use !
Notes
- Storage temperature not below -5 °C
- The duration of storage should not exceed 1 year.
- Store barrels horizontally.
- Re-seal container after use.
Please observe water resources policy act and EU safety data sheet! The product must not contact zinc orgalvanized materials. During winter operation a spray pressure of 6-9 bar may be required.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.