GLEITMO SFL 9085

Performance Features

• temperature range: -180 / +250 °C
• forms a dry, thin lubricating film
• adheres very well on many material surfaces
• offers exceptional non-stick and separating characteristics
• does not soil nor grease
• facilitates assembly of parts with robots (sealing rings, screws)
• suitable for use in food industry
• is environmentally harmless and user friendly
• is containing an UV-illumination additive for coating control by means of UV-light (340 – 380 nm)

Description

GLEITMO SFL 9085 is an air-drying water-based solid film lubricant with an organic binder. It contains a specially processed polytetrafluorethylene as an active ingredient with high lubrication and separating effects. GLEITMO SFL 9085 adheres very well on many materials.

Field of application

For dry lubrication of a wide variety of material pairings, such as metals, plastics, rubber and ceramics either with or among each other. For lubrication, wear protection and to avoid noise occurance in automobile interieur. geitmo SFL 9085 can be used for the coating of screws, nuts, bolts, fittings and rubber seals to enable defined assembly.

Method of application

GLEITMO SFL 9085 may be applied with compressed air and airless spraying systems. Agitators are recommended for the container in this case. Immersion is economical for coating large quantities of small parts. Application by brush or roller may lead to uneven coatings if not performed thoroughly and is only recommendable if spraying or immersion is not possible. The sliding surfaces to be coated should be carefully degreased with a solvent and allowed to dry.

Note

Stir well before use! Protect from freezing! Shelf-life: 18 months in the closed original containers at room temperature