ECOCOOL 7081 C
Water Miscible Cutting & Grinding Fluid
Description
ECOCOOL 7081 C is a general purpose, moderate duty semi-synthetic cutting and grinding fluid suitable for a wide variety of ferrous and non-ferrous metals.
ECOCOOL 7081 C contains extreme pressure (EP) additives and lubricity enhancers to provide fine surface finishes and extended tool life without the use of chlorinated paraffins. ECOCOOL 7081 C helps prevent burning, staining and cracking when grinding and provides excellent in-process rust protection.
How to Use
ECOCOOL 7081 C is mixed with water for use. It may be used at concentrations ranging from 10:1 to 20:1. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add ECOCOOL 7081 C concentrate to water.
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F).
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Suitable for both aluminum & ferrous materials
- Contains EP lubricity enhancers
- Good pH stability
- Fine surface finishes
- Extended tool life
- Provides in-process rust protection
- Triazine and chlorine free
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.