FM GREASE DC 2
Specialty direct contact, multifunctional grease for food processing applications in the food manufacturing industry
Performance Features
- Good wash out resistance to hot and cold water
- Good oxidation and mechanical stability
- Good corrosion prevention characteristics
- Good adhesive properties
- Neutral in odour and taste
- FM GREASE DC 2 is also available in spray form
Certifications and Specifications
- NSF 3H, H1
- NSF ISO 21469
- Kosher
- Halal
Description
FM GREASE DC 2 is a direct food contact grease designed for a number of special applications in the food manufacturing industry.
It is based on an inorganic thickener, a careful blend of fluids and additives, chosen for their ability to meet the stringent requirements of the food industry. Registered by NSF for use in both direct contact applications (Class 3H) and where there is potential for incidental food contact (Class H1). Produced according to FUCHS Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.
Applications
- Ideal for use as a direct food contact release agent
- Release agent for grills, loaf pans, cutters, boning benches, chopping blocks and other hard surfaces to help prevent food from adhering during processing
- Lubrication and protection of seals, guides, bearings and blades operating in food, pharmaceutical and other clean environments where direct food contact is inevitable
Seal and Paint Compatibility
Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.
Handling and Storage
All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend using the product within 3 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 3 years of date of manufacture, whichever is the sooner).
Industries
- Food
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.