VITROLIS CEC
Cold-end container glass coating
Advantages/Benefits
The product is made from 100% vegetable-based products and is produced on a site complying with MS1514:2009 Good Manufacturing Practice (GMP) for food, MS1480:2007 Food Safety According to Hazard Analysis and Critical Control Point (HACCP) System and is also Halal approved
Description
VITROLIS CEC cold-end container glass coating is formulated for glass and tableware used at coating temperatures in excess of 100°C. VITROLIS CEC cold-end glass coating provides your glassware with the protection needed to reach the consumer intact and scratch-free. The system applies a thin coating of VITROLIS CEC food-grade kosher fatty acid complex to glassware as it emerges from the annealing lehr. The ware passes through the heated spray hood on the lehr belt, where atomised particles of VITROLIS CEC settle onto the exterior surface of the glass. VITROLIS CEC bonds quickly to hot glass in an extremely thin film that significantly lowers the coefficient of friction of the glass.
The non-toxic formulation of VITROLIS CEC coating is designed to resist the formation of spray nozzle blockages in application equipment. VITROLIS CEC coating is a highly flexible product working well with synthetic, casein, starch, or self-adhesive glues.
Storage
Drums should be stored on their sides in a clean, dry place and should be protected from frost and extremes of temperature.
Industries
- Glass industry
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.