BITEEREX PLUS
Bitumen release agent for hot and melted asphalt
Performance Features
- economical to use
- no release problems when transporting asphalt on truck loading platforms
- very good release effect, even with stone mastic asphalt
- ready-to-use
- no labelling required according to the respective regulations
Description
BITEEREX PLUS is a low-viscosity, hydrocarbon-based, ready-to-use release agent for asphalt and bitumen. Thanks to its good release effect the product is suitable both for melted as well as for hot asphalt.
Field of application
Asphalt mixing plants, asphalt recycling plants, road finishing machines, truck loading platforms, and other equipment.
Application
BITEEREX PLUS is applied thinly and uniformly with a brush or suitable spraying device (with Teejet nozzle SS 1100067 or SS 800067). Consumption ranges between 20 and 30 m2/l.* The spray pressure should be maintained above 5 bar. BITEEREX PLUS must not be diluted with water, oils or solvents – it is ready for use!
Note
- The duration of storage should not exceed 1 year.
- Store barrels horizontally.
- Seal container after use in order to prevent active ingredients from escaping at higher temperatures.
- Re-seal container after use.
Please observe water resources policy act and EU safety data sheet! Prior to its use on rubber-tire rollers, seals, etc., the compatibility with the elastomers should be verified. The product may not come in contact with zinc or galvanised materials. In winter a spraying pressure of 6 to 12 bar may be required.
行业
- Construction
本网站所示信息基于福斯集团在润滑剂开发和制造领域的经验和专业知识，代表我们当前最前沿的技术水平。我们产品的性能受多种因素的影响，尤其是具体用途、应用方法、工作环境、构件预处理、可能的外部污染等。为此，无法对我们的产品功能作出普遍适用的声明。我们的产品不可用在飞机/飞船及其零部件上。如果零部件在安装到飞机/飞船上前，其润滑剂将被清除的情况除外。本网站信息只作为一般性的、无约束力的参考。对产品特性或产品对任何特定应用的适用性，我们不作任何明示或暗示保证。有鉴于此，我们建议您在使用产品前，应咨询福斯集团对口联系人，探讨产品的使用条件和产品特性。用户应针对计划的用途测试产品的功能适用性并在使用产品时采取相应的保养措施。我们的产品始终处于持续改进开发中。因此，除非有单独的客户协议另有规定，否则我们可在不预先通知的情况下，随时更改产品品种、产品、产品制造工艺和本网站的所有详细信息。