Jump to content

ECOCOOL TNA-IDM

 

Description

Multifunctional high performance water-miscible metalworking fluid:

  • Prolonged life time – low consumption
  • Very good high-pressure stability
  • No staining at critical Aluminium alloys
  • High metal removal rate, especially at Titanium and Inconel alloys
  • Free of Formaldehyde, Boron, MEA und Silicon
     
Conventional emulsion Yes
Semi synthetic emulsion -
Solution / fully synthetic -
Density at 15 °C 0.97
pH value 5% 9.3
Mixing water / hardness S, M, H
Boronfree Yes
Material recommendations Steel, Stainless Steel, Cr-Seel, Aluminum-alloys, Titan- and Nickel-based alloys

S = Water hardness soft; M = Water hardness medium; H = Water hardness hard

Main application area 

ECOCOOL TNA-IDM is a multifunctional, high performance product for drilling, turning, milling, and grinding of titanium-, nickel-based alloys, aluminum, stainless steel and steel. By using special components, critical aluminum alloys can be processed. Due to the many different applications and the robust design predestine ECOCOOL TNA-IDM for the fulfillment of high-performance challenges in metal working operations.

ECOCOOL TNA-IDM was not designed for longtime use in cast iron machining.

 

Industries

  • Metal processing
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Contact us
Phone
00420 603 899 914
Service Contact
+420 323 637 793
Business hours:

Mo-Fr: 8:30 - 16:30 O'clock