Electrolytic lines
The combination of the mechanical effect (brushing and/or spraying) with electrolytic degreasing prepares the sheet or strip for the subsequent surface treatment operations, which require perfect cleaning with total absence of oil so that the coating (whether tinned or galvanised) adheres perfectly and does not come off in subsequent forming operations.
The absence of foaming, the high detergency and the perfect wetting of the degreasing agent are the characteristics that will enable the highest quality required in the production of cans, galvanised sheet metal for the automotive industry, white goods and others.
High temperatures and humidity make it advisable to use robust lubricants for bearings and sliding elements.
Electrolytic degreasers
Product | Description |
RENOCLEAN FDC 4007 | Special cleaning agent for chemical and electrolytic degreasing. Highly effective, reduces working temperature and treatment time. |
RENOCLEAN MTA 4003 | Special cleaning agent for chemical and electrolytic degreasing. Highly effective, reduces working temperature and treatment time. More sustainable and extends bath service life. |
<Back
Greases and pastes
High level of humidity, acids or alkalis and high corrosion risk
Product | Description |
LAGERMEISTER 3000 Plus | Long-life, high performance, highly adhesive and sealing EP grease with excellent adhesive and anti-corrosion properties. Extremely water resistant. Especially recommended for the lubrication of rolling and plain bearings in industrial, construction and agricultural machinery. Approvals: Baier & Köppel, Dellner Couplers, Josef Fröhling, LINCOLN. |
RENOLIT CXI 2 | Extremely stable grease, highly resistant to ageing. Suitable for lubrication points where good resistance to water and high loads is required. Developed to operate under severe conditions on rollers and rolling mills in steelworks, mines, quarries, cement works and construction machinery. |
URETHYN MP 1 / URETHYN MP 2 | Polyurea-based grease resistant to high temperatures, high loads and highly resistant to environments with high humidity, even when in contact with salt water. For rolling and sliding bearings at high temperatures, e.g. long-term lubrication of bearings in electrical machines, fan bearings, rolling wheel bearings in continuous casting plants, pumping, blowing and compressor plants. It is approved by FLSmidth, Josef Fröhling, Loesche, Salzhausener Maschinenbautechnik SALMATEC, Sandvik, SMS Meer, ThyssenKrupp Resource Technologies, Zeppelin Baumaschinen, Amandus Kahl GmbH & Co. KG. |
RENOLIT G-PF 1 | Grease with high viscosity base oil and thickener with high resistance to acids and detergent solutions. For lubrication points where good resistance to water and high loads is required. Used as battery pole grease and for bearings and components of domestic and industrial washing machines. Developed to operate under severe conditions on rollers, bearings and conveyors in the surface-treatment and automotive industries. |
RENOLIT G 2000 | Extremely stable grease, highly resistant to ageing and to the vapours and emissions typical of cataphoresis and painting plants. Suitable for lubrication points where good resistance to water and high loads is required. Developed to operate under severe conditions on rollers, bearings and conveyors in the surface-treatment and automotive industries. |
RENOLIT G 460 | Marine grease with high mechanical stability and additivation. Excellent properties to protect bearings and other mechanisms against high loads and corrosion. For applications combining high contamination with fresh water and seawater. Approvals: NATO G-460, Military Standards: TL 9150-0066 (Germany), DEF STAN 91-34 (Great Britain), STM 7420 (France). |
<Back
Lubricating and assembly pastes for applications with very high loads or temperatures
Product | Description |
MEISSELPASTE | Copper-coloured lubricating paste. Range -20 to 1100 ºC. Dry lubricant film up to 1100°C for the lubrication of nestable tools, e.g. wear bushings in hydraulic and pneumatic hammers (ref: KRUPP, MONTABERT, RAMMER, INDECO, and others) from 75 to 6000 kg in weight, compressed-air drills and other equipment. Also for underwater and hot applications. Approvals: BAIER & KÖPPEL, DELIMON, LINCOLN. |
GLEITMO 100 | Assembly pastes with a wide range of applications. From approx. +140 °C purely dry lubrication due to solid lubricants. Facilitates assembly and disassembly and prevents stick-slip. For the running-in lubrication of heavily-loaded sliding bearings, slide and guide rails, gearwheels and threaded spindles as well as for the lubrication of bolts and bolted joints. Approvals: Daimler, Josef Fröhling, KHD Humboldt Wedag International, CAF. |
GLEITMO 155 | Specially developed for the lubrication of high temperature bolts, e.g. turbine bolts, fume system bolts and hot bolts in the chemical industry and refineries. |
GLEITMO 160 NEU | Copper paste for the preparation of threaded joints with bolts, hinges and couplings, including fittings immersed in the exhaust gas flow of combustion engines. Approvals: FLSmidth. |
GLEITMO 165 | No scale layers form. For the lubrication of turbine bolts, bolts subject to high temperatures and as assembly paste for the lubrication of bolts, sliding blocks and sliding rails at high temperatures. Approvals: VOLKSWAGEN, Volvo. |
GLEITMO 705 / GLEITMO 705-0 | Lubricating paste. Maintains its lubricating and separating properties at very high temperatures, increases the operational safety and service life of hot systems and tools. Suitable for slow-running bearings, pins, hinges, joints and slide rails in combustion, drying and annealing plants. Use as graphite lubricant for casting ladles. Gleitmo 705 is ideal for initial lubrication, while Gleitmo 705-0 is ideal for relubrication operations using centralised lubrication systems. |
GLEITMO WSP 5040 | High-performance white grease paste. Suitable for low sliding speeds and high loads as well as in case of contact rust. Application as a paste for threaded joints subjected to high temperatures up to +1200 °C. Suitable for machine components of all kinds that are subject to very high pressures, heavy loads and oscillating movements. Particularly in wet environments or under the effects of splashing water. For sliding surfaces that are prone to stick-slip and seizure. It is approved by COLUMBUS McKINNON Engineered Products (Pfaff-silberblau), NEUERO Industrietechnik für Förderanlagen, Sandvik, ThyssenKrupp Steel Europe. |
<Back
Hydraulic systems
Product | Description |
RENOLIN B Series | High-performance demulsifying universal hydraulic and general lubrication oils (HLP). Good ageing resistance and with additives for better corrosion protection, excellent filterability, good viscosity-temperature behaviour, good wear protection, demulsifier (water-repellent), air release, contains zinc. Suitable for all hydraulic systems, even if thermal stress is present. The RENOLIN B range meets and exceeds the minimum requirements for HLP hydraulic oils according to DIN 51 524-2; ISO 6743 / 4, HM; ISO 6743 / 6, CKC; ISO 11158, HM; Denison HF0, HF1, HF2 |
RENOLIN HVI Series | Demulsifying hydraulic and general lubrication oils with a high viscosity index (HVLP). They are mineral oil-based and contain zinc and additives that improve ageing behaviour, corrosion and wear protection. RENOLIN B HVI oils are suitable for all hydraulic systems, especially if excess viscosity during start-up or insufficient viscosity at operating temperature is problematic. The high VI offers multigrade characteristics. Energy saving through high efficiency. These products are HVLP hydraulic and circulation oils according to DIN 51 524-3. Approvals: ISO 6743 / 4, HV. ISO 11158, HV. Denison HF0, HF1, HF2. |
RENOLIN MR Series | AW/EP hydraulic and circulation oils with high viscosity index (HVLPD). Detergents, dispersants, with exceptional cleaning properties and residue carrying capacity. Suitable for all hydraulic systems subject to wide temperature fluctuations or outdoor operations, e.g. sluices, reservoir machinery and machines or any application at especially low temperatures. HVLPD according to DIN 51 502 in conjunction with DIN 51 524. ISO 6743/4, HV. |
RENOLIN MR MC Series | Universal hydraulic and lubrication oils containing MC base oils with a high viscosity index. High-performance synthetic base (HVLPD), detergents, dispersants, with excellent oxidation and shear stability and exceptional cleaning and residue-carrying properties. Very wide operating temperature range. They allow oil change intervals to be extended. They have multigrade characteristics. Energy saving through high efficiency. They are HVLP oils according to DIN 51524-3. |
RENOLIN LD 10 | Fluid for cleaning hydraulic and lubrication circuits, free of chlorinated solvents, for cleaning and flushing hydraulic and lubrication circuits. Eliminates gumming caused by infiltrating cooling lubricants. Machines can continue to run normally during cleaning and flushing. However, an oil change is recommended because all contaminants are carried away. It is approved by DIN 51502: HLP, DIN 51524-2: HLP (except for demulsifying properties) and ISO 6743-4:HM. |
<Back
