Tinplate Rolling
The high reductions required in the rolling of sheet metal to make tinplate with different steels (DWI, TFS and others) must be accompanied by obtaining the best surface quality.
In terms of productivity, it is essential to be able to roll the thin and hard materials used in tinplate at high speeds. It is particularly important to be able to roll at the highest possible speed with the lowest surface temperature at the mill outfeed.
FUCHS offers food-grade anticorrosive products to protect finished tinplate, with NSF registration and ISO 21469, Kosher and Halal quality certifications, especially suitable for the food and beverage industry.
Greases and pastes
General Greasing
Product | Description |
RENOLIT CA Series | Lubricating greases with excellent water resistance and good mechanical stability. Especially for wet environments. |
RENOLIT GP Series | Multi-purpose greases with high mechanical stability and good water resistance. For general lubrication of machinery, ball and roller bearings. |
RENOLIT EP Series | EP greases with high anti-wear and load-bearing properties. Especially recommended for centralised greasing systems and lubrication of gearboxes and gear systems. |
RENOLIT H 443-HD 88 | Thermosetting, water-repellent and easily pumpable grease. For the lubrication of anti-friction bearings and plain bearings operating under high loads, at high temperatures and in humid atmospheres. Approvals: RWE Rheinbraun, FLENDER, SKF, SIEMENS. |
RENOLIT LZR 2H | Multi-purpose quality grease with good adhesion and sealing. Corrosion protection even in the presence of salt water, compatible with Hytrel. Suitable for centralised lubrication systems in industrial plants and processing plants with high water contamination. Approvals: Baier & Köppel, LINCOLN, SKF. |
RENOLIT MO Series | Multi-purpose greases with MoS2. Excellent wear protection, high mechanical stability and good water resistance. Recommended use for bearings and mechanisms working under severe conditions: heavy loads, shocks and vibrations. |
<Back
Fluids for centralised systems and gearboxes
Product | Description |
RENOLIT EP 0 / RENOLIT EP 00 | Semi-fluid EP greases with high anti-wear and load-bearing properties. Especially recommended for centralised greasing systems and lubrication of gearboxes and gear systems. |
RENOLIT LZR 00 / RENOLIT LZR 000 | Green fluid greases, easily pumpable, with high adhesiveness and good wear and corrosion protection for centralised greasing systems in trucks, buses and construction machinery. Approvals MAN 283 Li-P 00/000, MB-Approval 264.0, Schaeffler Commercial, central lubrication systems from LINCOLN and SKF. |
RENOLIT CX-EP 0 | Calcium complex greases. Semi-fluid, long-life EP grease for lifetime greasing. Excellent anti-wear and load-bearing properties. Sealing effect, minimises the risk of leakage. Recommended for gearbox lubrication. Excellent compatibility with elastomers and non-ferrous metals. |
RENOLIT LST 00 | Semi-fluid, long-life EP grease for lifetime greasing. Excellent anti-wear and load-bearing properties. Sealing effect, minimises the risk of leakage. Recommended for gearbox lubrication. Excellent compatibility with elastomers and non-ferrous metals. |
RENOLIT EPLITH 00 | Semi-fluid lithium EP grease resistant to water and high temperatures. Recommended for worm screws and bevel, helical and spur gears. |
GEARMASTER LXG 00 | Fluid grease ideal for gears with high specific power. It can be used as a fluid grease in centralised lubrication systems for commercial vehicles and as a sealing grease for telescopic shock absorber tubes. |
RENOLIT SO-GFB | Semi-fluid fibrous grease. Does not detach under centrifugal force. Protects against corrosion even under high-humidity conditions. Especially for gearwheels due to effective wear protection. |
<Back
For high speeds
Product | Description |
RENOLIT S 2 | Dynamically light, long life or lifetime grease. Synthetic base oil. Good performance at high speeds and low temperatures, with anti-wear and EP properties. Speed factor: 1 000 000. Suitable for plain bearings, roller bearings, spindles and mechanisms in general. |
RENOLIT HI-SPEED | Dynamically light, long life or lifetime grease. Good performance at high speeds and low temperatures, with anti-wear and EP properties. Speed factor: 1 400 000. Suitable for plain bearings, roller bearings, spindles and mechanisms in general. Approved by MAG IAS Powertrain, Kekeisen, Nomoco Grinding, Waldrich Coburg, Waldrich Siegen and DST Technologie. |
<Back
Tinplate rolling oil
Product | Description |
TRENOIL STD/STE Series | Range of oils for tinplate cold rolling. Specially additivated to withstand very high rolling mill speed, high adhesion, low consumption, and good performance at low strip temperatures. Suitable for cold rolling in tandem or reversible mills, with or without the use of direct application systems. It improves productivity, reduces consumption and provides high quality standards in the manufacture of packaging, e.g. cans. |
<Back
Hydraulic systems
Product | Description |
RENOLIN B Series | High-performance demulsifying universal hydraulic and general lubrication oils (HLP). Good ageing resistance and with additives for better corrosion protection, excellent filterability, good viscosity-temperature behaviour, good wear protection, demulsifier (water-repellent), air release, contains zinc. Suitable for all hydraulic systems, even if thermal stress is present. The RENOLIN B range meets and exceeds the minimum requirements for HLP hydraulic oils according to DIN 51 524-2; ISO 6743 / 4, HM; ISO 6743 / 6, CKC; ISO 11158, HM; Denison HF0, HF1, HF2 |
RENOLIN HVI Series | Demulsifying hydraulic and general lubrication oils with a high viscosity index (HVLP). They are mineral oil-based and contain zinc and additives that improve ageing behaviour, corrosion and wear protection. RENOLIN B HVI oils are suitable for all hydraulic systems, especially if excess viscosity during start-up or insufficient viscosity at operating temperature is problematic. The high VI offers multigrade characteristics. Energy saving through high efficiency. These products are HVLP hydraulic and circulation oils according to DIN 51 524-3. Approvals: ISO 6743 / 4, HV. ISO 11158, HV. Denison HF0, HF1, HF2. |
RENOLIN MR Series | AW/EP hydraulic and circulation oils with high viscosity index (HVLPD). Detergents, dispersants, with exceptional cleaning properties and residue carrying capacity. Suitable for all hydraulic systems subject to wide temperature fluctuations or outdoor operations, e.g. sluices, reservoir machinery and machines or any application at especially low temperatures. HVLPD according to DIN 51 502 in conjunction with DIN 51 524. ISO 6743/4, HV. |
RENOLIN MR MC Series | Universal hydraulic and lubrication oils containing MC base oils with a high viscosity index. High-performance synthetic base (HVLPD), detergents, dispersants, with excellent oxidation and shear stability and exceptional cleaning and residue-carrying properties. Very wide operating temperature range. They allow oil change intervals to be extended. They have multigrade characteristics. Energy saving through high efficiency. They are HVLP oils according to DIN 51524-3. |
RENOLIN LD 10 | Fluid for cleaning hydraulic and lubrication circuits, free of chlorinated solvents, for cleaning and flushing hydraulic and lubrication circuits. Eliminates gumming caused by infiltrating cooling lubricants. Machines can continue to run normally during cleaning and flushing. However, an oil change is recommended because all contaminants are carried away. It is approved by DIN 51502: HLP, DIN 51524-2: HLP (except for demulsifying properties) and ISO 6743-4:HM. |
<Back
Compatible hydraulic systems
Product | Description |
TRENOIL HYD 46 | Hydraulic oil for cold rolling, formulated from components fully compatible with emulsions and cold-rolling oils. Maintains normal rolling emulsion values in case of leakage from e.g. "roll twist" or "roll balance" circuits. |
<Back
Circulating oils (Morgoils)
Product | Description |
RENOLIN MORGEAR Series | Highly-refined, circulating mineral oils for Morgan bearings. Excellent demulsibility (water separation), good corrosion protection for steel and non-ferrous metals. Good resistance to ageing (oxidation). Good compatibility with sealing materials, low foaming tendency and mild AW/EP performance. |
<Back
