Jump to content

Here you will find relevant information for professionals in the Automotive and Industry sector.

Interesting articles

04.05.2021 - 05:09 // Automotive Articles Greases miscibility
Greases miscibility
On many occasions it is very difficult to avoid mixing lubricants, especially mixing greases, for technical or economic reasons, for which it is necessary to have a basic miscibility guide that allows us to program the best lubricant change operation on each occasion.
Read more
21.04.2021 - 08:15 // Automotive Articles Coolants
Coolants
Automotive coolants are fluids designed to remove heat or thermal energy from the combustion engine. These coolants are formulated basically by basic fluids and additives. However, in this case base oils and additives are different from the ones use to formulate engine oils.
Read more
09.04.2021 - 08:30 // Automotive Articles Manual Transmission Fluids
Manual Transmission Fluids
The transmission plays a vital role for a vehicle. The transmission fluid enables cooling and lubrication, helping transmit force and pressure and also preventing the unwanted build-up of harmful sludge or contaminates. Incorrect or dirty transmission fluid can lead to problems such as difficulties in gear shifting and in worst-case scenarios, total transmission failure.
Read more
30.03.2021 - 08:00 // Automotive Articles Automatic Transmission Fluid
Automatic Transmission Fluid
The transmission plays a vital role for a vehicle. The transmission fluid enables cooling and lubrication, helping transmit force and pressure and also preventing the unwanted build-up of harmful sludge or contaminates. Incorrect or dirty transmission fluid can lead to problems such as difficulties in gear shifting and in worst-case scenarios, total transmission failure.
Read more
18.03.2021 - 04:06 // Automotive Articles Viscosity Charts
Viscosity Charts
Viscosity is the measure of a fluid's resistance to flow. Lubricants are classified, among other properties, by their viscosity. However, there is no single classification, but 4 main ones.
Read more
02.03.2021 - 03:44 // Automotive Articles Static Oil Bleed
Static Oil Bleed
Static bleeding is the release of the base oil from the grease thickener in the container in which it has been placed or in a non-moving part in which it has been placed and it occurs naturally in all types of greases.
Read more
25.02.2021 - 11:47 // Industry Articles Scaling through simulation
Scaling through simulation
The key when producing gear oils is not only to secure the right ingredients, but also effective mixing of the base oils and additives. In collaboration with simulation specialist TeSolva, FUCHS has developed a numeric process that simulates and visualizes all aspects of the dispersion process. This allows production equipment to be adapted quickly to meet increased demand.
Read more
15.02.2021 - 09:00 // Automotive Articles SCANIA Specifications
SCANIA Specifications
Using a lubricant approved by the manufacturer of your vehicle is the only way to ensure the quality of the product used. If you want to learn more about the Scania specifications for engine oils and gear oils take a look at this post.
Read more
04.02.2021 - 09:00 // Automotive Articles Synthetic base oils
Synthetic base oils
There are 5 types of base oils used for the formulation of lubricants. The 2 last groups are called Synthetic Oils. The properties of these base oils are consistent and highly predictable unlike those of mineral oils.
Read more
27.01.2021 - 09:00 // Automotive Articles Mineral base oils
Mineral base oils
There are 5 types of base oils used for the formulation of lubricants. The first 3 groups are called Mineral Oils. One of the main differences between mineral oils and synthetic oils is the content of impurities that we can find in them
Read more
Phone contact
+34 93 547 58 59
Business hours:

24 hours - 365 days