ECOCUT 715 LE
Description
ECOCUT 715 LE is a non-water-miscible coolant with a low oil mist index, a high-quality, chlorine free EP combination and polar lubrication improvers added. By using a special, low-evaporation basic oil and a combination of selected active substances, the use of ECOCUT 715 LE leads, in comparison to conventional cutting oils to a significant reduction of the oil mist and evaporation loss generated during the machining process.
Application
ECOCUT 715 LE is a chlorine free, high performance broaching oil used for the machining of difficult to extremely difficult machinable materials. Apart from broaching, it is also recommended for other machining methods (e.g., deep-hole-drilling, thread machining), where a low-viscous, highly active cutting oil is required. ECOCUT 715 LE stands out to its highly economical use due to the long service life of the tools. ECOCUT 715 is conditionally suitable for use with nonferrous metals. Pretest is recommended.
Benefits
• greater safety because of higher flashpoint
• reduce consumption because low-misting and low evaporation
• reduce workshop pollution
• low aromatic content
• tried and tested formulations
Storage conditions
Minimum Storage Life: 18 months from day of delivery. Prerequisites are the correct storage in unopened, original containers, protection from direct sunlight and rain. The storage temperature should not fall below +5°C or exceed above +40 °C.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.