ECOCUT HFN 16 LE
Description
ECOCUT HFN 16 LE contains high-quality base oils and was designed as oil for cutting operations with the bonus of being rationalisation products for hydraulic systems or for general lubrication.
ECOCUT HFN 16 LE contains substances to improve oxidation stability and corrosion protection.The inclusion of EP additives improves load bearing capacity and reduce wear between tool and
workpiece. ECOCUT HFN 16 LE is formulated to have low misting and low evaporation properties, it contributes towards reducing environmental and workshop pollution.
Application
ECOCUT HFN 16 LE is recommended for normal to difficult machining and grinding operations on steel, cast iron, aluminium alloys and yellow metals. Especially recommended application is grinding cam- and crankshafts with CBN wheels. Special Application ECOCUT HFN 16 LE is especially suitable for the machining of magnesium and its alloys. This is confirmed in the MADICA research project.
Benefits
• low foaming
• good washing effect keep machines clean
• reduce consumption because low-misting and low evaporation
• reduce workshop pollution
• increase tool life
• provide consistent grinding performance
• good filterability
• free of chlorine and zinc
• tried and tested formulation in wide areas of application
• free of chlorine, zinc and heavy metals
• available throughout the world
Storage conditions
Minimum Storage Life: 18 months from day of delivery. Prerequisites are the correct storage in unopened, original containers, protection from direct sunlight and rain. The storage temperature should not fall below +5°C or exceed above +40 °C.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.