Deep elimination of non-emulsified foreign oils. It allows a gain in efficiency and in cost, by the reduction of the frequency of emptying of the baths.

• Aspiration by float

• Pneumatic pump 6.8 Bars

• Compatible with aqueous fluids <49 ° C

• Available in high temperature version for washing <70 ° C

Cleaning the machine perimeters and emptying the oil tanks with discharge during the suction or delayed (hose + gun provided); Fluid filtration possible (depending on model). Possibility of emptying the tank up to 3 meters high.

• A unique suction power on the market,

• Simultaneous suction and discharge,

• Two filtration levels retaining particles up to 5µm,

• Easy and effortless use, total simplified cleaning,

• Excellent maneuverability suitable for industrial land,

• A retention basin to preserve the environment, including for draining accessories.

• Volumetric self-priming vane pump 230 V 50Hz - 750W, nominal flow rate 25L/min, pressure adjustment from 0 to 4 bar, IP55 protection
• 2 hoses (including 1 with strainer) 2 m long
• Filter holder + 1 filter cartridge delivered with the equipment
• Pressure gauge for filter clogging control
• Trolley with solid wheels
• Continuous and silent operation (< 70 dB). FILTRATION GROUP FOR OIL

Range of compact systems for the cleaning of cutting fluids. These systems can be permanently or permanently installed.MINIPURE continuously removes all pollutants from the cutting and process fluid: micro-chips, fine particles, solid particles and whole oils resulting from the lubrication of the machine. MINIPURE contributes to:

• Master the cutting conditions

• Improve the quality of • produced parts (surface condition and particulate cleanliness)

• Limit the wear or breakage of cutting tools (tools for watering the center)

• Avoid clogging the machine's original filters, sometimes under-sized

• Increase the life of cutting fluids

• Eliminate odors related to bacterial development

• Reduce consumption of new cutting fluids and processing additives

• Static mixer for the production of emulsions or solutions of 1 to 10%.

• Energy supplied by the mains water pressure (from 2 bar).

• Also available in stainless steel version for strongly acidic or basic fluids.