CEPLATTYN GT 10
Light-coloured, high-viscosity adhesive lubricant with white solid lubricants for Open Gears
Performance Features
- temperature range: 0/+140 °C / +32/+280 °F; recommended application temp.: > +10 °C/+ 50 °F
- excellent wear protection
- very good dry running properties
- unlimited suitability for kiln and mill drives
- no self-ignition on the hot kiln shell
- thick lubricating film
- very good lubricating film stability on the stationary tooth flank
- free of solvent and bitumen
Description
CEPLATTYN GT 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, e.g. on kilns, mills and driers in the raw materials industry. CEPLATTYN GT 10 is based on a synthetic base oil, new types of additives, and a combination of white, reaction-effective solid lubricants. This combination guarantees an extraordinarily good wear protection and an extremely high lubricant film stability. CEPLATTYN GT 10 together with CEPLATTYN GT P (Primer) and CEPLATTYN GT RN (Running-In) represents the FUCHS LUBRITECH Multi-Phase Lubrication.
Field of application
CEPLATTYN GT 10 has been especially developed for the application on Open Gears under critical operating conditions, such as low-speed kiln drives with increased tooth flank temperatures, mill drives with extreme drive power, and drives which are frequently operated under start-stop conditions. CEPLATTYN GT 10 includes flame-retarding substances reducing the danger of ignition, e.g. on the hot kiln shell (up to 400 °C). Furthermore CEPLATTYN GT 10 has a restricted flowability outside the meshing and is thus prevented to a large extent from leaving the gear guard. As opposed to conventional fluids CEPLATTYN GT 10 develops a thick lubricating film on the tooth flank which does not flow off of the metal surface, not even after a stoppage of the equipment. Thus CEPLATTYN GT 10 reliably protects from wear in the starting phase of the equipment which can happen with conventional fluids. The high portion of reaction-effective white solid lubricants prevents a seizure of the tooth flanks even in unfavorable lubricating and meshing conditions. CEPLATTYN GT 10 meets the requirements of AGMA 9005-E01 / D-2 and has been approved by FLSmidth, KHD Humboldt Wedag, Metso, and Outotec.
Method of application
CEPLATTYN GT 10 is suitable for the application in immersion bath, circulation lubrication and spraying systems. In terms of spraying applications a heating system is recommended with ambient temperatures below +10 °C/+50 °F.
Note
Shelf life: 24 months
Industrije
- Cement
- Forging
- Mining, quarrying, exploration
- Power generation
Informacije prikazane na ovoj strani temelje se na iskustvu i stručnosti grupe FUCHS u segmentu razvoja i proizvodnje maziva, a predočuju trenutno stanje tehnike. Na performanse naših proizvoda može utjecati niz čimbenika, a osobito specifična upotreba, metoda primjene, radno okruženje, predobrada dijelova, moguće vanjsko onečišćenje i slično. Zbog toga ne možemo dati univerzalno važeće izjave o funkciji naših proizvoda. Naši se proizvodi ne smiju upotrebljavati u zrakoplovima / svemirskim letjelicama ili njihovim dijelovima. To se ne odnosi na slučajeve kada se proizvodi mogu ponovno ukloniti prije ugradnje dijelova u zrakoplov odnosno svemirsku letjelicu. Informacije koje su ovdje navedene općenite su i neobvezujuće smjernice. Ne dajemo nikakva izričita ni prešutna jamstva vezana za svojstva proizvoda ili za njegovu prikladnost za određenu primjenu. Stoga vam preporučujemo da se obratite inženjeru tehničke podrške grupe FUCHS kako biste raspravili o uvjetima primjene i kriterijima radne izvedbe proizvoda prije nego što ih upotrijebite. Korisnik je odgovoran za testiranje funkcionalne prikladnosti proizvoda i upotrebu proizvoda uz dužan oprez. Naši su proizvodi podložni neprestanom daljnjem razvoju. Stoga zadržavamo pravo na izmjenu naše palete proizvoda, samih proizvoda i njihovih proizvodnih procesa, kao i pojedinosti navedenih na ovoj stranici, u bilo kojem trenutku i bez upozorenja, pod uvjetom da ne postoje specifični ugovori s kupcima koji to ne bi dopuštali.