HYKOGEEN RLP 100
Minimum quantity lubricant for pressure die casting of aluminium
Performance Features
- reduced porosity of the cast parts
- economic work due to extremely low consumption
- environmentally friendly
Description
HYKOGEEN RLP 100 is a mixture of high-grade oils for the minimum quantity lubrication during pressure die casting of aluminium. It consists only of lubrication active ingredients and is applied undiluted to the moulds. Due to the abdication of a carrier medium, wetting of even very hot tools is possible. The use of modern, automatic spraying equipment ensures an economic and environmentally friendly work.
Field of application
Pressure die casting of aluminium while using a minimum quantity lubrication system. The cooling and lubrication of the tools are thus completely independent from each other.
Method of application
Automatic, undiluted spray application with modern minimum quantity lubrication systems. The consumption lies as low as 60 to 120 g per ton aluminium cast.
Industries
- Casting
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.