HYKOGEEN LS 50
White stoving paste
Performance Features
- coat casting ladles
- longer tool life
- homogeneous, firmly adhering release film
- ready to use for warm and cold surfaces
- clean operating
Description
HYKOGEEN LS 50 is a spreadable, homogeneous paste containing a high percentage of white release solids
Field of application
HYKOGEEN LS 50 is a ready for use white burn-in paste for casting ladles and tools in related non-ferrous casting. After the pyrolytical volatilization of the base oil, a smooth, white release layer forms, thus helping ensure the casting operation runs without a hitch. HYKOGEEN LS 50 protects the casting ladle material and prevents iron from being introduced in the molten metal bath.
Method of application
HYKOGEEN LS 50 is best applied by brushing it on (using a brush or swab). At the same time it can be applied to both cold and pre-heated tools. The base oils decompose without leaving behind any residue at temperatures over 300 C°. The remaining white stoving paste forms a closed, firmly adhering coating.
Guide ladle coating
Preheat ladle to approx. 100-140 °C (e.g. with open flame of a burner). Apply HYKOGEEN LS 50 with a brush, only one coating! Allow the coating to level the surface for at least four hours. Better to prepare ladle at the end of the shift and let it dry near the oven over night (warm surrounding temperature is recommended).
First casting operation with the pretreated ladle will produce some smoke and flames. Then the burning in coating is finished. Life time of ladle made of heat resistant steel:
approx. 5-7 weeks in a three shifts per day operations.
Industries
- Casting
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.