AGRIFARM UTTO MP
Super High Performance Multifunctional Oil (UTTO/MFO) for use in transmission and hydraulic systems with integrated wet brakes, clutches and differentials for agricultural and construction machinery.
Description
AGRIFARM UTTO MP is a Super high-performance oil (UTTO/MFO) for use in transmission and hydraulic systems with integrated wet brakes, clutches and differentials for agricultural and construction machinery based on a careful selection of base oils and additive technology guarantees an excellent wear protection, a good viscosity and temperature and best friction property.
Application
AGRIFARM UTTO MP´s special additive components guarantee outstanding deceleration performance combined with a high capability of noise suppression over the full oil drain. Also gearboxes or combined gearbox-hydraulic-systems of agricultural and construction machinery with fill instruction HD-engine oil SAE 10W-30 or gear oils SAE 75W-80 acc. to API GL-4 can be filled using AGRIFARM UTTO MP alternatively. All machines working with accessory equipment drives should be switched to AGRIFARM UTTO MP consistently to utilize the maximum rationalization effect. AGRIFARM UTTO MP is miscible and compatible with conventional branded gear oils. However, mixing with other gear oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to AGRIFARM UTTO MP. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages/Benefits
- excellent protection from wear
- excellent protection from sludge, deposits, lacquering
- good anti-corrosion performance
- reduces brake chattering and squeaking
- optimum viscosity-temperature behaviour
- applicable as all season lubricant
- good synchromesh performance
- good seal and yellow metal compatibility
Industries
- Agriculture, forestry
- Automotive
- Construction
- Consumer, aftermarket
- Other industries
- Transport
Specifications
- API GL-4
- SAE J300: 10W-30
Approvals
- ZF TE-ML 03E, 05F, 17E, 21F (ZF001623)
FUCHS Recommendations
- AGCO Powerfluid 821 XL
- AGCO Q-186 (Whitefarm)
- ALLISON C-4
- CASE MS 1230, 1210, 1209, 1207, 1206
- CLAAS / LANDINI / SAME-Transmission
- CNH MAT 3505, 3506, 3509, 3525, 3526, 3540
- FNHA-2-C-200.00 / -201.00
- FORD M2C48-C3, ESN M2C86-B/C, M2C134-D
- JOHN DEERE JDM J20C
- KUBOTA UDT FLUID
- MASSEY FERGUSON CMS M 1145, 1143, 1141, 1135
- NH 410B
- SAE J306: 75W-80
- SDFG OT 1891 A
- VALTRA G2-08, G2-B10
- ZF TE-ML 06K
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.