SOK AQUA
Concrete release agent emulsion; preferred area of application: precast concrete plants
Performance Features
- operating temperature up to 70 °C (shuttering temperature)
- does not attack Styrofoam
- mineral oil free
- solvent free
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- contains very effective corrosion protection for steel shuttering
- does not impair the adhesion of plaster, adhesives and paint
- very good suitability as "board oil" for stone manufacture
- rapidly biodegradable
Description
SOK AQUA is an aqueous concrete release agent emulsion based on renewable raw materials. SOK AQUA is mineral oil and solvent free. SOK AQUA dries quickly after application.
Field of application
SOK AQUA is suitable for steel, plastic-coated and planed wooden shuttering.
Application
SOK AQUA is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering. SOK AQUA may not be mixed with release agents, water, oils or solvents. It is ready for use!
Note
The container must be protected from frost and direct sunlight. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production (for production date see bar code label).
Please observe water ressources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
Store cleaning rags wetted with SOK AQUA in a closed and approved container.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.