SOK AQUA CB
Concrete release agent emulsion, preferably for use as "board oil" in stone-production sites
Performance Features
- high release effect
- solvent free
- protects wooden shuttering
- largely prevents pore formation
- ensures the production of clean and uniform stone surfaces
- good biodegradability
Description
SOK AQUA CB is an aqueous concrete release agent emulsion. SOK AQUA CB is solvent free. SOK AQUA CB was designed for the application to the support boards in stone production.
Field of application
SOK AQUA CB is primarily suitable for the use on plastic-coated and planed wooden shuttering.
Application
SOK AQUA CB is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Unijet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering. SOK AQUA CB may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
The container must be protected from frost and direct solar radiation. The container is to be well sealed after each withdrawal.
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galva-nised materials.
The biological degradability of > 80% is related to the oil phase (modified storm test, easily biodegradable).
Store cleaning rags wetted with SOK AQUA CB in a closed and approved container.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.