SOK AQUA E
Concrete release agent emulsion, mainly for use in civil and structural engineering
Performance Features
- operating temperature up to 70 °C (shuttering temperature)
- solvent-free
- does not impair the adhesion of plaster, adhesives and paint
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- rain resistant after emulsion breaking
- does not attack Styrofoam
Description
SOK AQUA E is an aqueous concrete release agent emulsion. SOK AQUA E is solvent free. SOK AQUA E dries quickly after application.
Field of application
SOK AQUA E was particularly designed for the use in civil and structural engineering. The product is suitable for all well-established shuttering systems.
Application
SOK AQUA E is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Do not apply in rain. Attention is to be paid to a very economical application. Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 35 to 90 m² according to the type of shuttering. SOK AQUA E may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Storage temperature not below -10°C. The product is to be used within 6 months of production (for production date see bar code label). Please observe water resources policy act and EU safety data sheet! The product may not come in contact with zinc or galvanised materials. Rental shuttering, which has already been sprayed with release agent, must not be sprayed a second time with SOK AQUA E! Care must be taken that SOK AQUA E is not mistaken for a curing product when used. Store cleaning rags wetted with SOK AQUA E in a closed and approved container.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.