SOK AQUA EXTRA KS
Concrete release agent emulsion, mainly for use in precast plants
Performance Features
- application temperature: up to 70 °C (form temperature)
- contains very effective corrosion protection for steel shuttering
- free of solvents
- does not impair the adhesion of plaster, adhesives and paint
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- rain-resistant after emulsion breaking
- does not attack Styrofoam
Description
SOK AQUA EXTRA KS is an aqueous concrete release agent emulsion. SOK AQUA EXTRA KS is free of solvents.
Field of application
SOK AQUA EXTRA KS was particularly designed for the use in precast plants.
Application
SOK AQUA EXTRA KS is applied thinly and uniformly onto the clean and dry form using suitable spraying equipment (with Teejet nozzle SS 800067 or SS 1100067). The spraying pressure should be kept above 5.0 bar. Attention is to be paid to a very economical application. Drop formation and overdosage are to be avoided. Consumption amounts to approximately 1 litre for 25 to 50 m² according to the type of form. SOK AQUA EXTRA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Protect from frost. The product is to be used within 6 months after production (production date: see bar code label). The use of SOK AQUA EXTRA KS is neither subject to the Federal Law on Immission Control (BImSchG = Bundesimmissionsschutzgesetz) nor the VOC Directive. Please observe water resources policy act and EU safety data sheet! The product may not come in contact with zinc or galvanised materials.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.