ECO-HYD S PLUS
Environmentally harmless hydraulic oil based on synthetic ester
Performance Features
- readily biodegradable according to OECD 301 B
- outstanding viscosity temperature behaviour
- high cleaning efficiency
- good ageing and oxidation stability
- good corrosion protection
- excellent lubricating properties
- excellent wear protection
- applicable under extreme conditions
- excellent high and low tempera-ture behaviour
- very good shear stability
Description
ECO-HYD S PLUS is a largely applicable, ecologically harmless synthetic ester-based hydraulic oil (HEES) which is able to replace mineral-oil based types ranging in the viscosity classifications ISO VG 22 to ISO VG 68. It matches the specifications of ISO 15380. ECO-HYD S PLUS shows an excellent low-temperature behaviour as well as an outstanding temperature and ageing stability. The reserve performance of ECO-HYD S PLUS surmounts those of conventional mineral-oil based hydraulic oils.
Field of application
ECO-HYD S PLUS is recommended for the lubrication of machinery hydraulics when operating under extreme conditions e. g. temperatures below -30 OC or permanent oil-temperatures above 100 OC in reservoirs.
Method of application
Since ECO-HYD S PLUS is fully miscible and compatible with mineral oils, changing over to this product is no problem. Due to the fact that small residual quantities of mineral oil or corrosion preventives (in new gearboxes) can raise the water pollution category all systems should be thoroughly cleaned prior to the premiere use with regard to the VDMA-guideline 24569 and our technical information on ECO-HYD S - oils. In order to remove dissolved and filtered-out residues the filter-systems also have to be cleaned various times after having changed to ECO-HYD S PLUS owing to its high detergency. A compatibility to paint finishes and seals cannot be generally guaranteed, we therefore recommend a prior check or using paints based on two components.
Industries
- Agriculture, forestry
- Cement
- Construction
- Machinery, equipment
- Mining, quarrying, exploration
- Other industries
- Power generation
- Transport
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.