BITEEREX PLUS
Bitumen release agent for hot and melted asphalt
Performance Features
- economical to use
- no release problems when transporting asphalt on truck loading platforms
- very good release effect, even with stone mastic asphalt
- ready-to-use
- no labelling required according to the respective regulations
Description
BITEEREX PLUS is a low-viscosity, hydrocarbon-based, ready-to-use release agent for asphalt and bitumen. Thanks to its good release effect the product is suitable both for melted as well as for hot asphalt.
Field of application
Asphalt mixing plants, asphalt recycling plants, road finishing machines, truck loading platforms, and other equipment.
Application
BITEEREX PLUS is applied thinly and uniformly with a brush or suitable spraying device (with Teejet nozzle SS 1100067 or SS 800067). Consumption ranges between 20 and 30 m2/l.* The spray pressure should be maintained above 5 bar. BITEEREX PLUS must not be diluted with water, oils or solvents – it is ready for use!
Note
- The duration of storage should not exceed 1 year.
- Store barrels horizontally.
- Seal container after use in order to prevent active ingredients from escaping at higher temperatures.
- Re-seal container after use.
Please observe water resources policy act and EU safety data sheet! Prior to its use on rubber-tire rollers, seals, etc., the compatibility with the elastomers should be verified. The product may not come in contact with zinc or galvanised materials. In winter a spraying pressure of 6 to 12 bar may be required.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.