HYKOGEEN LS 507
High temperature lubricant
Performance Features
- temperature range: -20 / +1000 °C
- is well suited as casting ladle facing
- lubricates and separates well even at very high temperatures
- increases functional reliability and prolongs the service life of hot system parts and tools
- is classified as non-hazardous as defined by German legislation on hazardous substances
Description
HYKOGEEN LS 507 is a grey lubricating paste, with good lubricating properties, for use at high temperatures. A special synthetic oil containing a large amount of white solid lubricant combination lends this product good lubrication and separating properties. The carrier oil evaporates gradually at continuous temperatures exceeding 180 °C. A dry anti-friction film is formed which performs the task of lubrication under mixed and boundary friction conditions, and provides protection against wear. There is only very slight residue from the carrier oil, and this residue has a favourable effect during subsequent lubrication.
Field of application
Facing for casting ladles, tools, funnels and spouts in aluminium die casting.
Lubrication of slowly moving bearings, bolts, hinges, slipper pads and slide rails on firing, drying and annealing systems especially melting furnaces. Steelworks: coke discharging machines, connections rods and scot blowers.Die casting machines: ejector pins and other moving parts.
Wherever high temperatures preclude the use of oils and greases and wherever slow movements occur or a good separating effect is required.
Method of application
Die casting: Apply a thin film on the paste using a brush or tassel. Burn in above the melting or flame off until the pasty coating is dry - until the dry light-grey residue is obtained.
Industries
- Casting
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.