FM COOLANT
Synthetic freezing point depressant and anti corrosion protection concentrate for food and beverage processing equipment
Performance Features
- Depress freezing point of water solution
- Improves boiling point of water solution
- Prevents corrosion of materials
- Compatible with commonly used materials
- Long fluid fife: low maintenance cost
- To achieve good corrosion protection a minimum concentration of 30% FM COOLANT should be always be used (even if the required antifreeze protection would already be satisfied at lower concentration)
- Neutral odour and taste
Certifications and Specifications
- NSF H1
- Kosher
- Halal
Description
FM COOLANT is a propylene glycol-based fluid containing anti-corrosion additives, for use in closed systems to chill or cool food or beverages in Food Industry applications.
It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food and beverage industry.
Registered by NSF (Class H1) for use where there is potential for incidental food contact. Produced according to FLT Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.
Applications
- To be mixed with water to make a solution suitable for application. See tables on next page. The mixing water should have low hardness. If not available the use of demineralised or distilled water is recommended
- For use as secondary cooling, or heating, in the food and beverage industry. For use in closed cooling systems, including those where there is a potential for incidental food contact
- STRICTLY NOT for use in applications where direct contact between coolant and food itself, either packed or unwrapped, will occur: e.g., not for use where food is immersed in coolant for rapid chilling
- Various deicing, defrosting applications
- Freeze, burst and corrosion protection of pipelines
General Instructions
It is recommended that the condition of the fluid and the equipment be regularly checked to ensure safe operation. Special attention should be given to the possibility that the fluid, especially if it becomes contaminated with food ingredients, becomes a medium for bacterial or fungal growth.
Seal and Paint Compatibility
Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.
Handling and Storage
All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend that the product be used within 2 years from the date of manufacture. Upon opening a pack, the product must be used within 1 year (or within 2 years of date of manufacture, whichever is the sooner).
Industries
- Food
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
