SOK AQUA

Performance Features

• operating temperature up to 70 °C (shuttering temperature)
• does not attack Styrofoam
• mineral oil free
• solvent free
• largely prevents pore formation
• ensures the production of clean and uniform surfaces
• contains very effective corrosion protection for steel shuttering
• does not impair the adhesion of plaster, adhesives and paint
• very good suitability as "board oil" for stone manufacture
• rapidly biodegradable

Description

SOK AQUA is an aqueous concrete release agent emulsion based on renewable raw materials. SOK AQUA is mineral oil and solvent free. SOK AQUA dries quickly after application.

Field of application

SOK AQUA is suitable for steel, plastic-coated and planed wooden shuttering.

Application

SOK AQUA is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering. SOK AQUA may not be mixed with release agents, water, oils or solvents. It is ready for use!

Note

The container must be protected from frost and direct sunlight. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production (for production date see bar code label).
Please observe water ressources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
Store cleaning rags wetted with SOK AQUA in a closed and approved container.