Jump to content

TITAN GT1 LONGLIFE IV SAE 0W-20

Advantages

  • Especially developed for engines of VW.
  • Significant reduction of fuel consumption by 4% compared to the reference oil in the M111 test.
  • Outstanding fuel efficiency and thus reduced CO₂ emissions.
  • Excellent cold start behaviour and fast oil circulation in the whole engine at low temperatures.
  • Can be used for extended drain intervals.
  • Superior wear protection under all operating conditions despite its extremely low viscosity.
  • Thanks to BluEV Technology suitable for selected hybrid vehicles.

Description

TITAN GT1 LONGLIFE IV SAE 0W-20 is an innovative low-viscosity engine oil. The combination of state-of-the-art additive technology with a new base oil matrix provides the highest levels of performance regarding oxidation stability, resistance to oil aeration, wear protection, and shear stability. Significant improvements in fuel economy and CO₂ emissions were achieved by lowering the dynamic viscosity and employing a new additive technology of TITAN GT1 LONGLIFE IV SAE 0W-20. Thanks to its modern BluEV Technology formulation, the product TITAN GT1 LONGLIFE IV SAE 0W-20 meets the requirements of conventional as well as hybrid engines. The special composition of TITAN GT1 LONGLIFE IV SAE 0W-20 conserves a lot of fuel – more than 4% in the M111 FE Test, also resulting in reduced CO₂ emissions. The extremely high thermal
capacity and the optimised carbon bearing capabilities of TITAN GT1 LONGLIFE IV SAE 0W-20 offer enormous benefits for engines subjected to a lot of stress.

Application

TITAN GT1 LONGLIFE IV SAE 0W-20 was especially developed for the VW specification 508 00/509 00. TITAN GT1 LONGLIFE IV SAE 0W-20 is suitable for petrol and diesel engines. TITAN GT1 LONGLIFE IV SAE 0W-20 should only be used in diesel engines, when also low sulphur diesel fuel is used. TITAN GT1 LONGLIFE IV SAE 0W-20 was originally developed for conventional applications but additionally fulfills the requirements in selected hybrid applications according to the manufacturers specifications. BluEV Technology therefore builds the bridge between existing and new lubricant applications. TITAN GT1 LONGLIFE IV SAE 0W-20 is not backwards compatible with older VW specifications. Consequently, it may be only used in the approved applications! TITAN GT1 LONGLIFE IV SAE 0W-20 is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to TITAN GT1 LONGLIFE IV SAE 0W-20. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

 

Industries

  • Automotive
  • Consumer, aftermarket

Specifications

  • ACEA C5
  • FORD WSS-M2C956-A1

Approvals

  • PORSCHE C20
  • VW 508 00/509 00

FUCHS Recommendations

-

Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Contact us
Name
Customer service
Phone
+46 775 59 59 59
Customer Service
+46 775 59 59 59
Business hours:

Mon-Fri: 08:00 - 16:00