SOK AQUA E
Concrete release agent emulsion, mainly for use in civil and structural engineering
Performance Features
- operating temperature up to 70 °C (shuttering temperature)
- solvent-free
- does not impair the adhesion of plaster, adhesives and paint
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- rain resistant after emulsion breaking
- does not attack Styrofoam
Description
SOK AQUA E is an aqueous concrete release agent emulsion. SOK AQUA E is solvent free. SOK AQUA E dries quickly after application.
Field of application
SOK AQUA E was particularly designed for the use in civil and structural engineering. The product is suitable for all well-established shuttering systems.
Application
SOK AQUA E is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Do not apply in rain. Attention is to be paid to a very economical application. Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 35 to 90 m² according to the type of shuttering. SOK AQUA E may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Storage temperature not below -10°C. The product is to be used within 6 months of production (for production date see bar code label). Please observe water resources policy act and EU safety data sheet! The product may not come in contact with zinc or galvanised materials. Rental shuttering, which has already been sprayed with release agent, must not be sprayed a second time with SOK AQUA E! Care must be taken that SOK AQUA E is not mistaken for a curing product when used. Store cleaning rags wetted with SOK AQUA E in a closed and approved container.
Panoge
- Construction
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.