SOK AQUA EXTRA KS
Concrete release agent emulsion, mainly for use in precast plants
Performance Features
- application temperature: up to 70 °C (form temperature)
- contains very effective corrosion protection for steel shuttering
- free of solvents
- does not impair the adhesion of plaster, adhesives and paint
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- rain-resistant after emulsion breaking
- does not attack Styrofoam
Description
SOK AQUA EXTRA KS is an aqueous concrete release agent emulsion. SOK AQUA EXTRA KS is free of solvents.
Field of application
SOK AQUA EXTRA KS was particularly designed for the use in precast plants.
Application
SOK AQUA EXTRA KS is applied thinly and uniformly onto the clean and dry form using suitable spraying equipment (with Teejet nozzle SS 800067 or SS 1100067). The spraying pressure should be kept above 5.0 bar. Attention is to be paid to a very economical application. Drop formation and overdosage are to be avoided. Consumption amounts to approximately 1 litre for 25 to 50 m² according to the type of form. SOK AQUA EXTRA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Protect from frost. The product is to be used within 6 months after production (production date: see bar code label). The use of SOK AQUA EXTRA KS is neither subject to the Federal Law on Immission Control (BImSchG = Bundesimmissionsschutzgesetz) nor the VOC Directive. Please observe water resources policy act and EU safety data sheet! The product may not come in contact with zinc or galvanised materials.
Panoge
- Construction
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.