SOK 912
Concrete release agent primarily for the use in precast parts plants
Performance Features
- temperature for use up to 100 °C (formwork temperature)
- universal application
- suitable for the casting of exposed concrete
- prevents pore formation to a great extent
- ensures clean and even surfaces
- no impediment to plaster, adhesive, and paint adhesion
- easily biodegradable
Description
SOK 912 is a concrete release agent which is suitable for all absorbent and non-absorbent formwork. The aromatic compounds in the contained solvent have been extracted to a great degree which has a positive effect on the formation of odours. SOK 912 is adjusted "greasier" than its associated product SOK 128, and therefore it hardly contaminates the shuttering with release agent.
Field of application
SOK 912 is suitable for all formwork, e.g. roughly sawn and planed wooden formwork, steel formwork, film- and plastic-lined panels, polysulphide matrixes, and ABS-lined systems.
Method of application
A thin and uniform coat of SOK 912 is applied with a brush or a suitable spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for non-absorbent formwork: 50 - 100 m²/l, for absorbent formwork: 30 - 60 m²/l. SOK 912 may not be diluted with water, oils, or sovents - it is ready for use!
Notes
- storage temperature not below -5 °C
- the storage period should not exceed 1 year
- store barrels on their sides
- reseal packaging after removal, e.g. to prevent the active substances from escaping at elevated temperatures.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.