CEPLATTYN GT 10
Svetlo, visoko viskozno, oprijemljivo mazivo z dodanimi belimi mazalnimi delci za odprte zobnike
Performance Features
- temperature range: 0/+140 °C / +32/+280 °F; recommended application temp.: > +10 °C/+ 50 °F
- excellent wear protection
- very good dry running properties
- unlimited suitability for kiln and mill drives
- no self-ignition on the hot kiln shell
- thick lubricating film
- very good lubricating film stability on the stationary tooth flank
- free of solvent and bitumen
Description
CEPLATTYN GT 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, e.g. on kilns, mills and driers in the raw materials industry. CEPLATTYN GT 10 is based on a synthetic base oil, new types of additives, and a combination of white, reaction-effective solid lubricants. This combination guarantees an extraordinarily good wear protection and an extremely high lubricant film stability. CEPLATTYN GT 10 together with CEPLATTYN GT P (Primer) and CEPLATTYN GT RN (Running-In) represents the FUCHS LUBRITECH Multi-Phase Lubrication.
Field of application
CEPLATTYN GT 10 has been especially developed for the application on Open Gears under critical operating conditions, such as low-speed kiln drives with increased tooth flank temperatures, mill drives with extreme drive power, and drives which are frequently operated under start-stop conditions. CEPLATTYN GT 10 includes flame-retarding substances reducing the danger of ignition, e.g. on the hot kiln shell (up to 400 °C). Furthermore CEPLATTYN GT 10 has a restricted flowability outside the meshing and is thus prevented to a large extent from leaving the gear guard. As opposed to conventional fluids CEPLATTYN GT 10 develops a thick lubricating film on the tooth flank which does not flow off of the metal surface, not even after a stoppage of the equipment. Thus CEPLATTYN GT 10 reliably protects from wear in the starting phase of the equipment which can happen with conventional fluids. The high portion of reaction-effective white solid lubricants prevents a seizure of the tooth flanks even in unfavorable lubricating and meshing conditions. CEPLATTYN GT 10 meets the requirements of AGMA 9005-E01 / D-2 and has been approved by FLSmidth, KHD Humboldt Wedag, Metso, and Outotec.
Method of application
CEPLATTYN GT 10 is suitable for the application in immersion bath, circulation lubrication and spraying systems. In terms of spraying applications a heating system is recommended with ambient temperatures below +10 °C/+50 °F.
Note
Shelf life: 24 months
Panoge
- Cement, apno, mavec
- Kovaštvo
- Rudarstvo, kamnolomi in iskanje rudnin
- Pridobivanje elektrike
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.