CEPLATTYN GT 3
Svetlo, visoko viskozno, oprijemljivo mazivo z dodanimi belimi mazalnimi delci za odprte zobnike
Performance Features
- temperature range (short term): -5/+140°C / +23/+280°F; recommended application tem-perature: > +10°C/+ 50°F maximum permanent temperature in bath and circulation systems: 80°
- for bath and circulation systems
- excellent wear protection
- suitable for kiln and mill drives
- no self-ignition on the hot kiln shell
- thick lubricating film
- very good lubricating film stability on the stationary tooth flank
- free of solvent and bitumen
Description
CEPLATTYN GT 3 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, e.g. on kilns, mills and driers in the raw materials industry, used with bath or circulation systems.
CEPLATTYN GT 3 is based on a synthetic base oil, new types of additives, and a combination of white, reaction-effective solid lubricants.
This combination guarantees an extraordinarily good wear protection and an extremely high lubricant film stability.
Field of application
CEPLATTYN GT 3 has been especially developed for the application on Open Gears under critical operating conditions, such as kiln and mill drives in the cement and mining industry.
CEPLATTYN GT 3 includes flame-retarding substances reducing the danger of ignition, e.g. on the hot kiln shell. Furthermore CEPLATTYN GT 3 has a restricted flowability outside the meshing and is thus prevented to a large extent from leaving the gear guard.
CEPLATTYN GT 3 develops a thick lubricating film on the tooth flank which does not flow off of the metal surface, not even after a stoppage of the equipment. Thus CEPLATTYN GT 3 reliably protects from wear in the starting phase of the equipment which can happen with conventional fluids.
Method of application
CEPLATTYN GT 3 is suitable for the application in immersion bath and circulation lubrication systems.
Note
Shelf life: 24 months
Panoge
- Cement, apno, mavec
- Gradbeništvo
- Kovaštvo
- Rudarstvo, kamnolomi in iskanje rudnin
- Pridobivanje elektrike
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.