CEPLATTYN SF 10
Svetlo, visoko viskozno, oprijemljivo mazivo za odprte zobnike na mlinih pri pridobivanju surovin
Performance Features
- temperature range: 0 / +120°C / +32 / +250 °F; application temperature > +10°C / > +50°F
- excellent protection against wear
- good lubrication effect at minimum consumption
- good EP properties
- excellent adhesion
- free of solvents and bitumen
- causes no solid deposits in the tooth root
Description
CEPLATTYN SF 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gear drives on mills in the raw materials industry.CEPLATTYN SF 10 is based on a synthetic base oil and new types of additives to provide an extraordinarily good wear protection and lubricant film stability.CEPLATTYN SF 10 is free of bitumen and solvents. CEPLATTYN SF 10 together with CEPLATTYN SF P (Primer) and CEPLATTYN SF RN (Running-In) represents the FUCHS LUBRITECH Multi-Phase Lubrication.
Field of application
The high base oil viscosity guarantees a stable lubricant film between the tooth flanks being in contact. Together with the newly developed additive package this is the reason for the outstanding performance of CEPLATTYN SF 10. Even if lowest lubricant quantities are used, CEPLATTYN SF 10 guarantees reliable operating conditions of Open Gear drives in the raw materials industry. CEPLATTYN SF 10 has been especially formulated for heavy-duty, high-speed open mill drives subject to high vibrations. CEPLATTYN SF 10 is also suitable for the lubrication of large driving chains. CEPLATTYN SF 10 meets the demands according to the AGMA Standard for Open Gear drives. CEPLATTYN SF 10 is according to ANSI/AGMA 9005-E02/D-2 (formerly AGMA 13EP and 13S). It has been approved by CITIC, Ferry-Capitain/CMD, FLSmidth, KHD Humboldt Wedag, Metso, and Outotec.
Method of application
CEPLATTYN SF 10 is applied via commercially available spraying systems.An additional heating system may have to be used below +10°C/+50°F. For critical Open Gear drives on cement kilns we recommend CEPLATTYN SF 30 or the products of our CEPLATTYN KG 10-range.
Panoge
- Cement, apno, mavec
- Kovaštvo
- Rudarstvo, kamnolomi in iskanje rudnin
- Pridobivanje elektrike
- Jekla, kovine
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.