GLEITMO SFL 9085
Drsni lak na vodni osnovi z dodatkom MoS2
Performance Features
- temperature range: -180 / +250 °C
- forms a dry, thin lubricating film
- adheres very well on many material surfaces
- offers exceptional non-stick and separating characteristics
- does not soil nor grease
- facilitates assembly of parts with robots (sealing rings, screws)
- suitable for use in food industry
- is environmentally harmless and user friendly
- is containing an UV-illumination additive for coating control by means of UV-light (340 – 380 nm)
Description
GLEITMO SFL 9085 is an air-drying water-based solid film lubricant with an organic binder. It contains a specially processed polytetrafluorethylene as an active ingredient with high lubrication and separating effects. GLEITMO SFL 9085 adheres very well on many materials.
Field of application
For dry lubrication of a wide variety of material pairings, such as metals, plastics, rubber and ceramics either with or among each other. For lubrication, wear protection and to avoid noise occurance in automobile interieur. geitmo SFL 9085 can be used for the coating of screws, nuts, bolts, fittings and rubber seals to enable defined assembly.
Method of application
GLEITMO SFL 9085 may be applied with compressed air and airless spraying systems. Agitators are recommended for the container in this case. Immersion is economical for coating large quantities of small parts. Application by brush or roller may lead to uneven coatings if not performed thoroughly and is only recommendable if spraying or immersion is not possible. The sliding surfaces to be coated should be carefully degreased with a solvent and allowed to dry.
Note
Stir well before use! Protect from freezing! Shelf-life: 18 months in the closed original containers at room temperature
Panoge
- Avtomobilizem
- Stroji, oprema
- Jekla, kovine
- Ostale panoge
Podatki
Atesti
FUCHS priporočila
Na tej strani prikazane informacije temeljijo na izkušnjah in znanju skupine FUCHS s področja razvoja in proizvodnje maziv ter odražajo sedanje stanje v tehniki. Na zmogljivosti naših izdelkov lahko vplivajo številni dejavniki, zlasti specifična vrsta uporabe, način uporabe, delovno okolje, predhodna obdelava komponent, morebitna zunanja onesnaženja, itd. Zaradi tega razloga ni mogoče dajati splošno veljavnih izjav o delovanju naših izdelkov. Naših izdelkov ni dovoljeno uporabljati v letalih/vesoljskih plovilih ali v njihovih delih To ne velja za primere, kjer je izdelke mogoče znova odstraniti, še preden se komponente vgradijo v letalo/vesoljsko plovilo. Na tem mestu podane informacije so splošne, neobvezujoče smernice. V povezavi z lastnostmi izdelkov ali njihove primernosti za določene vrste uporabe ni ni zagotovljene niti izrecne niti implicitne garancije. Zaradi tega priporočamo, da se o pogojih uporabe in glede zagotavljanja zmogljivosti izdelkov še pred njihovo uporabo posvetujete z inženirjem skupine FUCHS, ki se ukvarja s tem področjem. Uporabnik je odgovoren za preverjanje primernosti izdelkov za določeno vrsto uporabe in jih mora uporabljati s primerno skrbnostjo. Svoje izdelke nenehno razvijamo. Zaradi tega si pridržujemo pravico do sprememb našega proizvodnega programa, izdelkov in njihovih proizvodnih procesov ter tudi do sprememb podatkov na tej strani, ki jih lahko izvedemo kadarkoli in brez predhodnega opozorila, če ni nobenih dogovorov s kupci, ki bi določali drugače.