RENOFORM EXT 6315 HT
Neat Oil Extrusion Fluid
Description
RENOFORM EXT 6315 HT is a heavy duty, non-chlorinated extreme pressure (EP) extrusion lubricant intended for difficult cold forming operations on cold headers and cold parts formers. It is especially effective for operations that generate excessive heat. RENOFORM EXT 6315 HT provides excellent EP lubrication to lower heat generation and reduce or eliminate smoke. It also reduces or eliminates staining or varnishing of lubricant on manufactured parts. Any residual film remains oily so processed parts are easy to clean. RENOFORM EXT 6315 HT contains inhibitors to avoid corrosion of copper and copper alloys. This allows the product to be used for dual side lubrication in some equipment where its viscosity permits.
Application
RENOFORM EXT 6315 HT is typically used as received without dilution. It is flowed or flooded directly onto the dies and punches on large headers or parts formers. It can be applied directly to the wire or rod on small headers. RENOFORM EXT 6315 HT is readily cleaned from work-pieces with mild to moderately alkaline cleaner solutions.
Advantages
- Excellent EP lubrication
- Low oil formula
- Reduced staining or varnishing on parts
- Non-corrosive to copper and copper alloys
- Makes very difficult parts
- No smoke for more pleasant working conditions
- Easily cleaned work
- Dual side capability/no tool side-lube side cross contamination
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.