PLANTO HYTRAC PLUS
Biodegradable Premium Performance multifunctional Oil (UTTO) for tractor transmissions with or without wet brakes.
Description
PLANTO HYTRAC PLUS is the environmentally friendly alternative for mineral oil-based multifunctional oils (type UTTO). PLANTO HYTRAC PLUS is a Premium Performance multifunctional oil (UTTO/MFO) for use in transmission and hydraulic systems with integrated wet brakes, clutches and differentials in agricultural and construction machinery. PLANTO HYTRAC PLUS is biodegradable and not water-soluble. In case of leakages PLANTO HYTRAC PLUS will remain in the upper soil layers and will be biodegraded there.
Applications
PLANTO HYTRAC PLUS is used in manual transmission and gear/hydraulic systems with or without integrated oil-bath brakes. Halving the drain interval, compared to conventional mineral-based products, is recommended. Components requiring an automatic transmission oil cannot be filled with PLANTO HYTRAC PLUS. Switching to PLANTO HYTRAC PLUS does not require a change of seals or filter elements, but this needs to be verified in each case. Attention: Due to the very high cleaning property of the base oils the filter cartridges should be checked and, if required, changed after 50 operating hours. More than one filter change may be necessary. One-component repair varnishes are usually not resistant to PLANTO HYTRAC PLUS. Avoid the contact of PLANTO HYTRAC PLUS with surfaces covered with repair varnishes which are very often are not resistant to biodegradable base oils.
PLANTO HYTRAC PLUS is miscible and compatible with conventional, branded multifunctional oils. However, mixing with other multifunctional oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended before converting to PLANTO HYTRAC PLUS.
Advantages
- Biodegradable acc. to OECD 301 > 60%.
- Outstanding cold start properties and rapid oil circulation.
- Excellent shear stability.
- Thermally stable.
- Prevents deposits.
Industries
- Agriculture, forestry
- Automotive
- Construction
- Consumer, aftermarket
- Other industries
- Power generation
- Transport
Specifications
SAE 10W-30
SAE 80
Approvals
FUCHS Recommendations
- API GL-4
- CASE MS 1207, 1209
- FORD M2C134-D
- JOHN DEERE JDM J20C
- NH 410B
- MASSEY FERGUSON CMS M 1143, 1135, 1127
- HLP/HVLP ISO VG 32, 46, 68, 100 (according to DIN 51 524-2 /-3)
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.