RENOFORM OS 7910
Chlorine Free Water Soluble Drawing and Stamping Lubricant
Description
RENOFORM OS 7910 is a heavy-duty, nonchlorinated soluble oil intended for severe drawing and stamping on steel and stainless steel alloys. RENOFORM OS 7910 should not be used for copper or brass parts because of the potential for staining. RENOFORM OS 7910 is capable of replacing many highly chlorinated products thus providing significant cost savings through the elimination of post process cleaning and special wastewater disposal requirements.
RENOFORM OS 7910 is water-soluble so it is economical to use and is easily cleaned from parts. It contains a rust inhibitor to provide excellent “inprocess” corrosion protection of ferrous metals. RENOFORM OS 7910 is non- gumming for a clean running operation, and is compatible with carbide tooling.
How to Use
RENOFORM OS 7910 can be applied with roller coat, brush or drip equipment. When diluted with water to a fluid state, it can be flood or spray applied.
For very difficult draws, use RENOFORM OS 7910 as received without dilution. For easier operations, mix RENOFORM OS 7910 with water, blending oil or solvents. For flood or spray applications, the typical dilution range is 1 to 9 parts water to 1-part product.
Advantages
- Heavy duty formula
- Chlorine free
- Water soluble
- Contains a corrosion inhibitor
- Compatible with carbide tooling
- Makes difficult and complex parts
- Easier for disposal
- Low use cost, easy cleaning
- Good “in-process” corrosion protection for ferrous metals
- Extended tool & die life
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.