ECOCOOL 711
Water Miscible Cutting & Grinding
Description
ECOCOOL 711 is a water miscible coolant which provides long sump life, low odor and excellent pH stability. It is highly suitable for cast iron machining and can also be used for machining other ferrous and non-ferrous alloys. It is not recommended for brass or other copper alloys.
ECOCOOL 711 contains an EP lubricity package that makes it effective for aluminum machining and an anti -wear package to extend tool life on steel. The outstanding in- process rust protection of ECOCOOL 711 makes it a good choice for cast iron machining. It is low foaming and is stable in water hardness up to 1000 ppm as CaCO3. The emulsification system produces a tight, stable emulsion that effectively tolerates tramp oils without producing insoluble residues.
Advantages
- Excellent sump life
- Low foaming
- Suitable for ferrous and aluminum
- Contains EP lubricity enhancers
- Good pH stability
- Fine surface finishes
- Extended tool life
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.