RENOFORM SVH
Vanishing Lubricant
Description
RENOFORM SVH is a low viscosity vanishing lubricant intended for stamping light gauge ferrous and non-ferrous metals. The low viscosity ensures limited carry-off to provide low consumption and economy of operation.
RENOFORM SVH leaves very little residue, so the need for cleaning is usually eliminated. Any residue that might remain is compatible with most industrial finishes. However, if the parts are to be painted, we recommend prior testing with the specific paint involved to ensure no problems occur. RENOFORM SVH minimal film that evaporates quickly so parts are almost immediately available for finishing.
How to Use
RENOFORM SVH is used as received without dilution. It can be applied with most airless spray equipment systems. It can also be applied using dip, drip, brush or roller coat methods.
Advantages
- Usually eliminates cleaning
- Evaporates quickly
- Parts are ready for finishing
- Low viscosity
- Limited carry-off/economy of use
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.