TITAN GT1 FLEX 34 5W-30 from FUCHS Lubricants is a Premium Performance, extreme fuel-economy engine oil for modern passenger cars and light commercial vehicles with or without extended service intervals. It is suitable for petrol and diesel cars with exhaust after treatment like particulate filters.

TITAN ATF 6008 from FUCHS Lubricants is a Premium Performance Automatic Transmission Fluid (ATF), specially developed to optimise the shifting performance of ZF automatic transmissions.
The Automatic Transmission Fluid (ATF) has been specially developed with reduced viscosity to optimise the performance of specified 6 and 8-speed ZF automatic transmissions.

TITAN CARGO MAXX 10W-40 from FUCHS Lubricants, is a premium low-SAPS, MAXX Performance engine oil with XTL (Xtreme Temperature Lubrication) technology specially developed for commercial vehicles with modern exhaust after-treatment and turbocharger. It has efficient cold starting properties as well as ageing stability, improving fuel-economy over the entire drain-interval.

Gone are the days when we had to salt our food or cover it with ice blocks to make it keep longer. Nowadays, we take it for granted that we can keep food cold in the fridge at home or in the supermarket and keep ourselves cool on hot days at work or in the car. The principal function of a refrigeration oil is to adequately lubricate all moving parts in the refrigerant compressor. Depending on the type of compressor, heat must also be dissipated, and compression chambers and valves have to be sealed.

With winter almost here, the demand for antifreeze will increase. On average about 150-litres of coolant is pumped through a vehicle’s engine per minute. One third of the combustion temperature is dissipated to the atmosphere by the coolant. The coolant also passes through about 100 different materials and needs to be compatible with them all.

TITAN FFL-2 from FUCHS Lubricants is a Premium Performance Double Clutch Transmission Fluid (DCTF) specially developed for VW Double Clutch Transmission with wet clutch. The gear oil provides optimum wear protection and excellent friction properties even under hard driving conditions and offers best shifting performance.

ACEA, API and OEM requirements. It’s all about oil specifications. In other words, requirements that are important, but sometimes perceived as awkward. But it is possible to meet these requirements, while also simplifying handling and saving costs. The key to success is to put the pieces in the right place!

FUCHS Lubricants TITAN 2T 100S is an ultra-high-performance two-stroke engine oil for Autolube and Premix systems formulated with fully synthetic base oils.

Cold, pressure and temperature, but also dirt, energy consumption and viscosity. When it comes to choosing a hydraulic fluid, there are many different aspects to consider. Here we provide some recommendations on efficient, economic lubrication, and hydraulics that take performance to the next level.

You often wonder which engine oil is the best for your customer vehicles. There are many manufacturers of engine oils who advertise with original manufacturer approvals. However, each product from the FUCHS Lubricants product range shows you the 3 essential characteristics that you should pay attention to when choosing oil: